新闻资讯

How Colored Photoluminescent Powder Is Made by Pure Firing

The colored photoluminescent powder on this page is from Dalian IfGlow Technology Co., Ltd., listed in the Glow Powder by Color group. The page describes a kiln-fired luminous ceramic with an intrinsic color that is light green by day and a bright blue glow at night. It says the color is generated inside the material rather than applied as a dye or a coating. The page gives a particle size range of 5 to 1700 microns, an afterglow of 8 to 12 hours and an initial brightness of 3000 to 5000 mcd/m2. It does not give a specific grade name for this blue-green product.

The Colored Glow Powder

The page says the powder is made by pure firing with zero dyeing. It compares that process with traditional surface dyeing and says the intrinsic color does not fade or peel because the color is part of the fired material. The page gives a higher hardness and a QUV test claim for the fired product, and it says the traditional dye is prone to wear and UV fading. A buyer should ask for the QUV test report and the hardness data, because the page gives the claims but not the test numbers.

The page says the color is born from rare earth elements, with a pure luminous color, higher brightness and a longer afterglow than a dyed product. It does not give the rare earth type or the ratio. A buyer should ask for the material data sheet and the safety data sheet. The page says the product contains no organic dyes or binders and that high-temperature firing leaves no volatile emissions. The buyer should ask for the VOC or the emission test if the powder is used in an indoor or a food contact product.

Pure Firing and Durability

The page says the pure fired powder is certified by FDA and EN71 and is suitable for food contact and child-safe applications. That is a strong claim, so a buyer should ask for the certificate number and the test scope. The page does not give a migration test for a specific polymer or a coating. The buyer should confirm the compliance for the final article, not only for the powder. The page does not give a REACH statement, so the buyer should ask for the full regulatory pack.

The page says the product is an inorganic material with a high-temperature stable structure and a long service life. It does not give a temperature limit for compounding or a processing window. A buyer should ask for the thermal stability data before mixing the powder into a plastic, a resin or a glaze. The page does not give a moisture sensitivity or a storage condition. The buyer should ask for the recommended storage and the shelf life, because a fine powder can absorb moisture and cake.

Particle Size and Brightness

The page gives a particle size range of 5 to 1700 microns and says the size can be customized. It says an ultra fine powder gives a detailed and clear pattern, while a coarser particle gives a stronger glow. A buyer should match the size to the printing method, the coating thickness and the pattern detail. The page does not give a D50 or a size distribution curve. The buyer should ask for the sieve data and a sample of the target size before a bulk order.

The page gives an afterglow of 8 to 12 hours and an initial brightness of 3000 to 5000 mcd/m2. It does not state the excitation source, the excitation time or the measurement distance. A buyer should ask for the test method and the decay curve. The page says the brightness can be customized. The buyer should confirm the target brightness and the charge time for the application. The page does not give a waterproof level for this item, although the site lists a waterproof customization service.

Applications and Ordering

The page lists high-end fashion accessories, limited edition footwear, bags, watches and jewelry, premium objects and art, and professional sports equipment. It also lists automotive, authentication, spatial design and medical devices in the site case menu. Those uses are broad, and a buyer should name the substrate, the process and the target glow. The page does not give a recommended loading rate for each application. The buyer should ask for a starting formula and run a trial.

The page says the waterproof treatment holds Japanese patents, with high-pressure water resistance, moisture stability, high-temperature adaptability and weak acid and alkali resistance. It does not give a test standard or a duration. A buyer who needs an outdoor or a washable product should ask for the waterproof test report and the recommended grade. The page gives the contact as jen@ifglow.com, +86-411-8461 9565 and WhatsApp +86 139 4289 2197. For a first order, a sample and a trial in the real process are the practical way to check the colored photoluminescent powder.

Online Message

Leave your phone or email, we will contact you within 24 hours

Submit Message